Daily maintenance of Solid Surface Countertop

Solid surface is rich in color, solid, non-toxic and non radiation, with fire resistance, anti permeability, anti-bacterial mildew proof, impact resistance, easy maintenance, seamless stitching, rich modeling and other advantages, more and more used in kitchen table and other indoor decoration. In order to maintain the beauty of the Solid Surface countertop and extend the service life of the table, we need to pay attention to the maintenance of the Solid Surface countertop.

1、To keep the Solid Surface countertop bright and clean as new, please clean the stains in time. Usually, the Solid Surface countertop is easy to clean with water. You recommended to wash it once a day. And try to keep the table dry when you don't use it.

2、Clean with water and wipe with a dry cloth when the Solid Surface countertop is dirty. Please DO NOT wash it with clean balls to avoid get scratches.

3、Avoid surface contact with strong alkali strong acid and strong chemical, as its will destroy the surface or make the table surface Whitening. If contact with the above items carelessly, use a lot of soapy water to rinse the surface immediately. If surface have nail polish, use a acetone free detergent (e.g.: tin water, alcohol) and then wash it with water.

4、If there are rubber, nail polish, paint and other sticky material that are difficult to clear on the table, it can be wiper gently with the knife when necessary. Please control the strength and avoid the damage of the solid surface table.

5、Please avoid the impact of a strong external force on the table without thickening and strengthening. If you cut the bone on the top, or suffer a great impact, it may damage your countertop. Especially to avoid placing heavy objects at the jointed place.

6、The heat source should not be placed directly on the table, and the surface can not be directly placed on the goods with too high temperature. Such as the hot pot taken down from the stove or oven, the microwave oven, may bring damage or even crack to the surface of the solid surface, and it is suggested that the heat insulation pad should be used.

7、Prevent cutting tools or tools from the top of the table; do not use solid surface table as cutting plate , although the Solid surface table is solid and durable, but this will leave unbeautiful scratches.

8、Scratch, burning mark how to do: first use coarse sand paper to scratch (if it is slight scratch, do not use coarse sand paper, can be directly used in fine sand paper), and then in order to use 400#, 600#, 1000#, 1200#, 1500# and other sand paper water grinding with jasmine cotton with dry cotton cloth polished.